The AxleTech SPRC2197 tandem set features heavy duty cast steel housings along with heavy duty four pinion planetary wheel ends. They are engineered to meet the extra toughness demanded by the OEM's in today's demanding environment. When you couple rough terrain with heavy loads and adverse weather conditions, you need the strength and support of AxleTech International's planetary tandem axles. The SPRC2197 has the capability to meet the most severe vocational duty cycles and provide productivity uptime that converts directly to the end-user productivity.
Log haulers, truck cranes, dump trucks, heavy equipment transporters, and special purpose vehicles work in some of the most grueling environments in the world. Axle Tech tandem planetary axles are designed with these conditions in mind.The SPRC2197 has capability of up to 760,000 lb (344,750 kg) in gross combination weights (GCW) dependent upon specific vocational duty cycle requirements. A balanced gearing design puts more power at the wheel ends. This reduces torque and stress on axle shafts and carrier/differential gearing, directly contributing to longer component life and reduced maintenance costs.
The SPRC2197 has a wide selection of features, both standard and optional, available to provide the heavy-duty tandem that is able to be optimized for your specific vocational requirements and makes this tandem the product of choice. A listing of standard features include high capacity hypoid gearing, crowned planet gears, and rugged high strength steel axle housings. Optional features that include inter-axle differential with a pressurized oil lubrication system, single or dual style wheel hub mountings, and a range of overall axle ratios are available to be allow you to optimize the SPRC2197 to your specific vocational requirements.
In addition, extra axle housing magnets provide for reduced metallic contamination between oil lubrication intervals.
AxleTech's special axle shaft manufacturing process produces high strength and shock resistant axle shafts to withstand the torsional stress requirements of large engines and transmission low gear operations.
- 135,000 lb / 61,300 kg
- Cast steel
- High Traction or NoSPIN®
- Final ratio
- 9.59, 10.66, 11.23, 12.69, 14.10, or 14.86
- 90 in / 2,286 mm or 100 in / 2,540 mm
- Wheel mounting
- 12 studs, 20.38 in / 518 mm bolt circle
- Minimum wheel size
- 24 in / 610 mm
- Typical axle weight
- 7,250 lb / 3,283 kg for 90 in / 2,286 mm track
- Typical oil capacity
- 68 pt / 32.1 L at each carrier and 14 pt / 6.6 L at each wheel end